The macros are specifically designed for BLOODY gaming mice and Bloody 7 software.

In the folder 'core-3': Primary MGN macros for Core 3 mode - use in HEADSHOT. Additional AMC macros for Core 3 mode - use in BUTTON.

In the folder 'core-4': AMC macros for Core 4 mode - use in BUTTON.

In the folder 'RL core-...': Macros that activate only when both right and left mouse buttons are pressed simultaneously.

Instructions for installing Bloody macros are available HERE.

If the macros do not display in Bloody 7 or are malfunctioning, update your software by downloading the latest version HERE.

How to install Bloody 7 and WorkShop 8 software:

  1. Install the latest version of Bloody 7 from this link.
  2. Copy (save as a copy) the folder where you installed Bloody 7. Usually it is located at "C:\Program Files (x86)\Bloody7".
  3. Install WorkShop8 software. During installation, the previous version of Bloody 7 will be uninstalled.
  4. Rename the folder "Bloody7 - copy" to "Bloody7".
  5. Now you can run Bloody 7 and WorkShop8 programs one after another.

Important: running different versions simultaneously is impossible.

Features of Battlefield 6 macros.

  • Macros are set to the CONTROL level using the recommended attachments. However, you can deviate from these recommendations while maintaining the CONTROL level.
  • The higher the PRECISION settings, the more accurate the fire. In addition, the lower the scope multiplicity, the higher the accuracy.
  • Crouching does not reduce recoil.

Settings for battlefield-6_bloody_ultra_pack:

SETTING - MOUSE KEYBOARD - INFANTRY - CONTROL SETTING (EDIT)

  • Infantry Mouse Aim Sensitivity - 20
  • Zoom Sensitivity Coefficient - 178
  • Infantry Zoom Aim Sensitivity - 95
  • Vertical Mouse Aim Ratio - 95
  • Invert Vertical Look - OFF
Image

Decoding names in battlefield-6_bloody_ultra_pack:

  • 1 digit indicates the weapon class: 1 - assault rifle, 2 - carbine, 3 - submachine gun, 4 - light machine gun, 5 - sniper rifle.
  • Block 2 weapon name - the macro belongs to a specific weapon.
  • The 3rd digit is the CONTROL value (see the detailed CONTROL settings below).
  • 4 digits with an "X" is the multiplicity of the sight.
Image

List of macros for battlefield-6_bloody_ultra_pack:

1-AK4D_38-2.0x.amc

1-AK4D_43-2.0x.amc

1-AK4D_51-2.5x.amc

1-All-Tapping_as.amc

1-B36A4_53-2.0x.amc

1-KORD_60-2.0x.amc

1-KORD_65-3.0x.amc

1-KORD_68-1.5x.amc

1-L85_51-3.50x.amc

1-L85_56-3.50x.amc

1-M433_44-1.5x.amc

1-M433_46-1.5x.amc

1-M433_51-2.0x.amc

1-NVO228_42-2.0x.amc

1-NVO228_45-2.0x.amc

1-NVO228_55-2.0x.amc

1-SOR556_54-1.75x.amc

1-SOR556_57-4.0x.amc

1-SOR556_63-4.0x.amc

1-TR7_34-1.25x.amc

2-AK205_65-3.0x.amc

2-AK205_72-1.75x.amc

2-AK205_72-3.0x.amc

2-All-Tapping_carabine.amc

2-GRT-BC_46-1.75x.amc

2-M4A1_40-1.5x.amc

2-M4A1_42-1.5x.amc

2-M4A1_44-1.5x.amc

2-M277_36-1.0x.amc

2-M277_38-1.0x.amc

2-M277_38-3.0x.amc

2-M417_35-1.5x.amc

2-M417_37-1.5x.amc

2-QBZ192_43-2.0x.amc

2-SG553_43-1.75x.amc

2-SG553_46-1.75x.amc

2-SOR300_46-1.5x.amc

2-SOR300_51-2.0x.amc

3-All-Tapping_smg.amc

3-KV9_66-1.0x.amc

3-KV9_66-1.5x.amc

3-PW5_64-1.75x.amc

3-PW7_68-1.5x.amc

3-PW7_68-1.75x.amc

3-SCW10_51-1.25x.amc

3-SCW10_56-1.25x.amc

3-SGX_60-1.5x.amc

3-SGX_65-1.5x.amc

3-SGX_65-1.75x.amc

3-SL9_64-2.0x.amc

3-SL9_68-2.0x.amc

3-UMG40_57-2.0x.amc

3-USG90_55-1.5x.amc

3-USG90_57-1.5x.amc

4-All-Tapping_lmg.amc

4-DRSIAR_51-3.50x.amc

4-DRSIAR_54-4.0x.amc

4-KTS100_63-1.0x.amc

4-KTS100_63-4.0x.amc

4-KTS100_66-3.0x.amc

4-L110_57-2.0x.amc

4-M60_47-1.5x.amc

4-M60_52-2.0x.amc

4-M60_55-3.0x.amc

4-M123K_55-1.5x.amc

4-M123K_57-2.0x.amc

4-M240L_44-1.5x.amc

4-M240L_51-2.0x.amc

4-M250_48-2.0x.amc

4-M250_51-3.0x.amc

4-RPKM_51-2.5x.amc

4-RPKM_57-4.0x.amc

5-All-Tapping_dmr.amc

5-LMR27_36-1.0x.amc

5-LMR27_36-4.0x.amc

5-LMR27_41-4.0x.amc

5-M39EMR_19-4.0x.amc

5-M39EMR_20-4.0x.amc

5-M39EMR_20-4.5x.amc

5-SVDM_21-4.0x.amc

5-SVDM_23-2.5x.amc

5-SVK-8.6_8-4.5x.amc

M-1-AK4D_38-2.0x.mgn

M-1-AK4D_43-2.0x.mgn

M-1-AK4D_51-2.5x.mgn

M-1-All-Tapping_as.mgn

M-1-B36A4_53-2.0x.mgn

M-1-KORD_60-2.0x.mgn

M-1-KORD_65-3.0x.mgn

M-1-KORD_68-1.5x.mgn

M-1-L85_51-3.50x.mgn

M-1-L85_56-3.50x.mgn

M-1-M433_44-1.5x.mgn

M-1-M433_46-1.5x.mgn

M-1-M433_51-2.0x.mgn

M-1-NVO228_42-2.0x.mgn

M-1-NVO228_45-2.0x.mgn

M-1-NVO228_55-2.0x.mgn

M-1-SOR556_54-1.75x.mgn

M-1-SOR556_57-4.0x.mgn

M-1-SOR556_63-4.0x.mgn

M-1-TR7_34-1.25x.mgn

M-2-AK205_65-3.0x.mgn

M-2-AK205_72-1.75x.mgn

M-2-AK205_72-3.0x.mgn

M-2-All-Tapping_carabine.mgn

M-2-GRT-BC_46-1.75x.mgn

M-2-M4A1_40-1.5x.mgn

M-2-M4A1_42-1.5x.mgn

M-2-M4A1_44-1.5x.mgn

M-2-M277_36-1.0x.mgn

M-2-M277_38-1.0x.mgn

M-2-M277_38-3.0x.mgn

M-2-M417_35-1.5x.mgn

M-2-M417_37-1.5x.mgn

M-2-QBZ192_43-2.0x.mgn

M-2-SG553_43-1.75x.mgn

M-2-SG553_46-1.75x.mgn

M-2-SOR300_46-1.5x.mgn

M-2-SOR300_51-2.0x.mgn

M-3-All-Tapping_smg.mgn

M-3-KV9_66-1.0x.mgn

M-3-KV9_66-1.5x.mgn

M-3-PW5_64-1.75x.mgn

M-3-PW7_68-1.5x.mgn

M-3-PW7_68-1.75x.mgn

M-3-SCW10_51-1.25x.mgn

M-3-SCW10_56-1.25x.mgn

M-3-SGX_60-1.5x.mgn

M-3-SGX_65-1.5x.mgn

M-3-SGX_65-1.75x.mgn

M-3-SL9_64-2.0x.mgn

M-3-SL9_68-2.0x.mgn

M-3-UMG40_57-2.0x.mgn

M-3-USG90_55-1.5x.mgn

M-3-USG90_57-1.5x.mgn

M-4-All-Tapping_lmg.mgn

M-4-DRSIAR_51-3.50x.mgn

M-4-DRSIAR_54-4.0x.mgn

M-4-KTS100_63-1.0x.mgn

M-4-KTS100_63-4.0x.mgn

M-4-KTS100_66-3.0x.mgn

M-4-L110_57-2.0x.mgn

M-4-M60_47-1.5x.mgn

M-4-M60_52-2.0x.mgn

M-4-M60_55-3.0x.mgn

M-4-M123K_55-1.5x.mgn

M-4-M123K_57-2.0x.mgn

M-4-M240L_44-1.5x.mgn

M-4-M240L_51-2.0x.mgn

M-4-M250_48-2.0x.mgn

M-4-M250_51-3.0x.mgn

M-4-RPKM_51-2.5x.mgn

M-4-RPKM_57-4.0x.mgn

M-5-All-Tapping_dmr.mgn

M-5-LMR27_36-1.0x.mgn

M-5-LMR27_36-4.0x.mgn

M-5-LMR27_41-4.0x.mgn

M-5-M39EMR_19-4.0x.mgn

M-5-M39EMR_20-4.0x.mgn

M-5-M39EMR_20-4.5x.mgn

M-5-SVDM_21-4.0x.mgn

M-5-SVDM_23-2.5x.mgn

M-5-SVK-8.6_8-4.5x.mgn

Detailed CONTROL settings and recommended attachments

control/precision - scope - muzzle - barrel - underbarrel - ammunition

AK4D

  • control/precision 38/27 - 2.0x flash hider(10) basic(10) ... standard(5)
  • control/precision 43/28 - 2.0x suppressor(20) extended(15) stubby(20) standard(5)
  • control/precision 51/35 - 2.5x suppressor(20) heavy(10) vertical(35) standard(5)

B36A4

  • control/precision 53/31 - 2.0x convertor(10) extended(15) vertical(25) standard(5)

KORD 6P67

  • control/precision 60/42 - 2.0x convertor(10) heavy(10) stubby(20) standard(5)
  • control/precision 65/45 - 3.0x convertor(10) heavy(10) vertical(25) frangible(20)
  • control/precision 68/41 - 1.5x suppressor(20) heavy(10) vertical(25) standard(5)

L85A3

  • control/precision 51/32 - 3.5x suppressor(20) extended(15) angled(15) standard(5)
  • control/precision 56/43 - 3.5x convertor(10) heavy(10) vertical(25) standard(5)

M433

  • control/precision 44/23 - 1.5x convertor(10) short(15) stubby(20) standard(5)
  • control/precision 46/22 - 1.5x suppressor(20) extended(15) stubby(20) standard(5)
  • control/precision 51/23 - 2.0x suppressor(20) extended(15) vertical(25) standard(5)

NVO-228E

  • control/precision 47/27 - 2.0x brake(5) short(15) slim angled(25) standard(5)
  • control/precision 45/29 - 2.0x convertor(10) extended(15) stubby(20) standard(5)
  • control/precision 55/29 - 2.0x suppressor(20) extended(15) vertical(35) standard(5)

SOR-556 MK2

  • control/precision 54/47 - 1.75x convertor(10) extended(15) stubby(20) standard(5)
  • control/precision 57/48 - 4.0x convertor(10) extended(15) vertical(20) standard(5)
  • control/precision 63/47 - 4.0x suppressor(20) extended(15) vertical(25) standard(5)

TR-7

  • control/precision 34/18 - 1.25x brake(10) extended(15) stubby(20) standard(5)

For the "standard" bullet, any alternative except "penetration".

There are no alternatives for the "penetration" bullet.

Battlefield 6 HomePage Of The Game.

PRIVACY POLICY

This Privacy Policy (hereinafter – the "Policy") applies to all information, including personal data as defined by Federal Law No. 152-FZ of the Russian Federation "On Personal Data" dated July 27, 2006 (hereinafter – Personal Data). It establishes the procedures for the collection, storage, use, and disclosure of personal data of users of the website recoil-coder.com (hereinafter – the "Site"). The Site Administrator strives to ensure transparency in data processing and to comply with the requirements of the legislation of the Russian Federation on the protection of personal data.

General Provisions

By leaving your data on the Site, the User confirms their consent to this Personal Data Processing Policy. The Policy regulates the relations arising in the process of using the Site, including registration, order placement, and interaction with the Site Administrator.

Purposes of Personal Data Use

Personal data is used for the following purposes: - Registration and identification of the User. - Processing and provision of services (for example, sending order confirmations, payment notifications). - Informing about changes in the content of goods. - Ensuring security and preventing fraud. - Processing User requests, providing support, and resolving arising issues.

Legal Bases for Processing Personal Data

The Site Administrator processes Users' Personal Data based on one of the following grounds: - The User's consent to the processing of their Personal Data (for example, when searching for the User's purchases). - Performance of a contract to which the Site Administrator is a party (updating, correcting, changing an order). - Compliance with the requirements of the legislation of the Russian Federation. - Protection of the legitimate interests of the Site Administrator (ensuring security, preventing fraud), except in cases where the User's interests have priority. - Statistical and research purposes, provided that such data is subject to mandatory depersonalization.

Collected Data

The Site collects the following categories of information: - Personal Data: email address (provided by the User when making a purchase). - Technical Data: cookie files, IP address, web beacons/pixel tags, data on browser identifier, operating system, time of visit, and pages viewed.

This data is collected automatically to improve the operation of the Site and analyze its use. Based on this data, it is impossible for the Site Administrator to identify the identity of a visitor.

The collection of Personal Data is carried out only with the User's consent or in cases expressly provided for by the legislation of the Russian Federation.

Order and Conditions of Processing

The data will be used throughout the entire period of the contractual relationship with the User and after its termination, as necessary to fulfill the purposes of processing (for example, to comply with legal requirements).

Personal data is not transferred to third parties, except in the following cases: - Transfer of data at the request of state authorities in accordance with the legislation of the Russian Federation. - Obtaining prior consent from the User for data transfer. - Use of payment processing services (for example, bank gateways), which may receive transaction information to process payments. These services comply with data protection legislation requirements.

Protection of Personal Data

The Site Administrator does not verify the Personal Data provided by the User and cannot judge their reliability, as well as whether the User has sufficient legal capacity to provide this data. At the same time, the Site Administrator proceeds from the good faith of the User when providing Personal Data, which must meet the principles of reliability, sufficiency, and relevance. By providing data, the User gives their consent to the processing of Personal Data.

In most cases, Personal Data is processed automatically without access by the Site Administrator. In case such access is necessary, it is granted only to the Site Administrator to perform their tasks. To protect and ensure confidentiality of data, the Site Administrator complies with internal rules and procedures regarding the processing of Personal Data.

The Site Administrator takes legal, organizational, and technical measures to protect Personal Data from unlawful or accidental access to them, destruction, copying, provision, dissemination, as well as from other unlawful actions in relation to Personal Data.

Use of Cookies and Analytics

The Site uses cookies, web beacons, and similar technologies – these are small text files placed on your device that you use to access the Site. They contain information that is collected from your device and sent back to the Site upon each subsequent visit in order to remember your actions and preferences over time.

To analyze site traffic and improve its operation, the Site Administrator uses Yandex.Metrica service provided by YANDEX. The service automatically collects data about devices and user behavior, including anonymized IP addresses (which means they do not allow identifying a specific user), information from cookie files, information about browser and viewed pages. This data is used to generate depersonalized statistics about site traffic. The processing is carried out on the basis of a legitimate interest in optimizing the Site, namely for improving user experience and increasing resource efficiency.

The use of cookies allows the Site Administrator to collect depersonalized statistical information about visits to the Site. They help the site remember information about you, for example, what language you are viewing the site in and which pages you have already opened; this information will be useful on your next visit. Thanks to cookies, browsing the site becomes much more convenient.

The User can manage cookie settings through their browser and prohibit data collection by disabling cookies in their browser settings.

User Rights Regarding Personal Data

The User has the right: - To receive information about their personal data stored by the Site Administrator. - To request clarification or correction of inaccuracies in their personal data. - To delete their personal data (in accordance with Russian legislation). To withdraw their consent to personal data processing.

Changes to this Policy

The Site Administrator reserves the right to make changes to this Policy without prior notice to Users. All changes will be published on this page. By continuing to use the Site after changes are published, you confirm your consent to this new version of this Policy. We recommend that you regularly review this Policy for up-to-date information.

Contact Information

If you do not agree with this Policy, please do not visit this Site.

If you have any questions regarding the processing of your personal data, please contact us via email at: legal.scripter@yandex.ru.

COOKIE POLICY

General Provisions

This Cookie Policy (hereinafter referred to as the "Policy") complements the Privacy Policy of the site recoil-coder.com (hereinafter referred to as the "Site"). It describes the types of cookies used, the purposes of their application, the methods of data processing, and the options for refusing the use of cookies.

What are Cookies?

Definition: Cookies are small text files that are stored on your computer or mobile device when you visit the Site. They allow the Site to identify you upon subsequent visits and remember certain information to improve your user experience.

Why Does the Site Use Cookies?

Purposes: The Site uses cookies for the following purposes: - Preferences Storage: Remembering your preferences (language, font, etc.) for convenience when using the Site. - User Identification: Recognizing your browser when you log in to the Site. - Analytics: Collecting anonymous statistics about Site visits to enhance its performance and content.

- Site Functionality: Ensuring the proper operation of specific sections and pages of the Site. - Usability Improvement: Optimizing navigation and interaction with the Site. - Personalization: Providing more relevant content and offers.

What Types of Cookies Does the Site Use?

Types of Cookies: - Technical (Essential): Provide basic functionality of the Site; without them, it will not work correctly. - Session Cookies: Temporary files that are deleted after closing the browser. They are used to track your activity during a single session. - Persistent Cookies: Stored on the Visitor's device for a specified period and remember settings. - Statistical Cookies: Collect anonymous information about the Site's traffic (e.g., which pages Visitors have viewed).

Used Services: For analyzing site traffic and improving its performance, the Site Administrator uses the Yandex.Metric service provided by YANDEX. This service automatically collects data about the device and user behavior, including anonymized IP addresses (which means they do not allow for the identification of a specific user), information from cookies, details about the browser, and visited pages. This data is used to form anonymized statistics about site traffic. Processing is based on a legitimate interest in optimizing the Site, specifically to enhance user experience and improve the resource's efficiency.

How to Manage Cookies?

Refusal to Use Cookies: Users can manage cookie settings through their browser and disallow data collection by disabling cookies in the browser settings. Please refer to your browser's help for instructions. In most desktop browsers, the data clearing window can be opened with the following keyboard shortcuts: - Windows/Linux: Ctrl + Shift + Del - macOS: Command + Shift + Delete After that, simply select the time range and types of data. Details for each browser are provided further down.

Managing Stored Cookies: You can view and delete cookies set by websites through your browser settings.

Your Rights Regarding Personal Data

If you do not agree with this Policy, please do not visit the Site.

If you have any questions regarding the processing of your personal data, please contact the Site Administrator at the email address legal.scripter@yandex.ru.

Offer Agreement for Digital Goods

1. General Provisions

This document constitutes a public offer (hereinafter referred to as the "Offer") from Recoil-Coder.com (hereinafter referred to as the "Seller") and contains all essential terms of the sales contract for digital goods (hereinafter referred to as the "Goods") listed on the website www.Recoil-Coder.com.

The Offer is addressed to any individual (hereinafter referred to as the "Buyer") wishing to purchase the Goods.

The acceptance (full and unconditional acceptance) of the Offer is executed by the Buyer placing an Order and making the payment. The agreement is considered concluded upon acceptance.

The Seller reserves the right to amend the terms of the Offer. The new version takes effect from the moment it is published on the Website. Continued use of the Website after the publication of changes indicates consent to the new version.

2. Subject of the Agreement

The Seller agrees to transfer ownership of the digital product (intangible object provided in electronic form) to the Buyer, and the Buyer agrees to pay for it and accept it.

The range, characteristics, price, and terms of provision of the Goods are determined on the Website at the time of placing the Order.

3. Order Placement Procedure

The Order is placed by the Buyer independently through the interface of the Website.

The Buyer bears full responsibility for the accuracy of the provided data (email, contact information). The Seller is not responsible for the consequences of providing incorrect data, including the inability to deliver the Goods.

The agreement is considered concluded from the moment an electronic notification of successful payment is sent to the Buyer or access to the Goods is provided.

4. Price and Payment Procedure

The price of the Goods is indicated on the Website in Russian rubles and includes all applicable taxes (if applicable).

The price may be changed by the Seller unilaterally without prior notice. The new price takes effect from the moment it is published on the Website.

Payment is made using the methods available on the Website (bank cards, electronic wallets, etc.).

The obligation of the Buyer to pay is considered fulfilled from the moment the funds are credited to the Seller's settlement account or payment aggregator.

5. Delivery and Transfer of Goods

The digital product is provided to the Buyer in the form of a link for access to a personal account, sent to the email provided during the Order placement.

Delivery is carried out instantly after payment confirmation unless otherwise specified in the description of a specific Product.

The Seller is not responsible for delays in delivery caused by technical failures of payment systems, mail services, or the Buyer's Internet service providers.

6. Return and Exchange of Goods

Since the Goods are digital and provided instantly, refunds for Goods of proper quality after access is granted are not possible.

Returns or exchanges are only possible in the case of:

- Non-compliance of the functionality or characteristics of the Goods with the description on the Website;

- Presence of irremediable technical defects that prevent the use of the Goods for their intended purpose.

The request for a return must be sent to the Seller within 24 hours of purchase, accompanied by evidence (video, screenshots).

The following Goods are non-refundable:

- Incompatibility with the Buyer's equipment or software;

- Blocking of access to the Goods by third parties (e.g., platforms for which the software is intended);

- If access to the Goods was provided fully and correctly according to the description.

7. Rights to Intellectual Property Results

All rights to the Goods, including copyrights, belong to the Seller.

The Buyer acquires the right to use the Goods solely for personal non-commercial purposes unless otherwise provided in the license attached to the GOODS. Copying, distribution, modification, or resale of the Goods without the Seller's written consent is prohibited.

8. Limitation of Liability

The Seller is not liable for any direct or indirect losses incurred by the Buyer as a result of using or being unable to use the Goods if these losses are caused by the actions of the Buyer, third parties, or force majeure circumstances.

The Seller guarantees the compatibility of the Goods only with those devices and software specified in the description on the Website.

9. Confidentiality and Personal Data

The processing of Buyers' personal data is governed by the Privacy Policy posted on the Website.

The Seller undertakes not to disclose the data received from the Buyer to third parties, except in cases provided for by the legislation of the Russian Federation and necessary for the fulfillment of the contract (e.g., transferring data to payment systems).

10. Seller's Details

- Name: Recoil-Coder

- Email: legal.scripter@yandex.ru

- Address on Digiseller (DigiCore Solutions LTD): dolviz.key.shop

11. Governing Law and Dispute Resolution

The relationships between the parties are governed by the legislation of the Russian Federation. All disputes and disagreements are subject to resolution through negotiations. If consensus cannot be reached, they shall be addressed in the Arbitration Court at the Seller's location